Pre-Made Lanyards
Knot and Rope Supply
Blaze Lanyard - Spliced Eyes
Blaze Lanyard - Spliced Eyes
Blaze Lanyard - Spliced Eyes
Blaze Lanyard - Spliced Eyes
Blaze Lanyard - Spliced Eyes
Blaze Lanyard - Spliced Eyes
(Click to see larger image and other views)

Blaze Lanyard - Spliced Eyes

SKU: 650
Weight: 2 lbs 5 ozs
FT/QTY   Add to the cart Add to Cart
Product Details
This item is a safety lanyard.

Quite simply, it used primarily by arborist to secure themselves to a tree in a work positioning situation. The lanyard typically attaches to steel mounting rings (typically called "D's) that are on each side of the work saddle worn by the climber. The lanyard attaches to one side of the harness, then passes around the tree, and back to the other side of the saddle. The clip on one side makes it easy to attach and remove from the saddle as the climber moves from point to point on the tree.

The design of this is really pretty simple, there is a heavy duty safety snap on one end and a tight eye splice on the other. To make a low cost but very effective adjustment device, you simply attach a caribiner and pulley to a piece of prusik cord on the lanyard and you are all set.

The photos above show what we are talking about.

  • Hand spliced eyes on both ends of this lanyard.
  • Anodized aluminum snapĀ 
  • Two sizes available - 10' 12' and 14'
  • For technical assistance call us at 419-873-8300 ex. 2
Hi! you also might like to take a look at these things as well.....
Check the check boxes next to the additional products that you would like to add to the shopping cart, then click on the "Add to Cart" button above. A check box is not shown if a product requires that you select an option or fill out a field. () indicates a required accessory.