6mm Single Strand Cotton
Weight: 9.0 lb
Premium 100% cotton fiber in a single strand. No longer will you have the task of untwisting 3 strand rope before starting on your macrame or other craft project. Get to work right away with 600 or 1500 feet of 3mm cotton wrapped onto a cardboard tube.
As a note of courtesy, because of the rather loose nature of the rope strands, this rope might measure a touch bigger or smaller than 3MM depending on the tension applied to the rope. This is totally normal and shouldn't be considered a defect.
If you already purchase your 3 strand cotton from Knot & Rope Supply, this will look familiar. This product is used in one of the stages of production for the 3 strand cotton rope we sell.
Wherever possible, use splices constructed to safe specifications. A proper splice on a rope can maintain 80% to 100% of the new rope average break strength. Trained personnel should construct all splices. If knots are used on a rope, be aware that they can reduce the rope's strength by up to 50%. If knots are required, be sure to select the proper knot for the job.
All rope has a rating referred to as a "tensile strength" or "average break strength." This number is the amount of weight that the rope should be able to hold in ideal conditions, specifically, a new rope, with no knots or splices, at room temperature. These break strength numbers are based on actual destructive break testing by the manufacturer or a certified third-party testing facility. Ropes are tested over many cycles and the average break strength is determined and specified for the product. We test our ropes personally, and all our splicers have their work tested on an ongoing basis using a certified test bed facility. This is to ensure that their splicing work is perfect, and that their splicing technique and skills are 100% within acceptable splicing guidelines set by the rope industry. Even the best splices and best rope can break if overloaded or used improperly. Make sure you thoroughly understand what you are doing with a rope. Get the right rope for the right job. If you have questions or are even remotely unsure or have doubts. STOP and get the information you need to BE SURE you are doing things safely.
ope wear, knots, extreme hot or cold temperatures, chemicals, the manner in which the load is applied and other factors will result in a break strength lower than the stated average break strength.
A rope with a stated or advertised break strength, in pounds will not necessarily safely hold something that weighs that amount! Refer to the SAFE WORKING LOAD of a specific rope for more information.
IF IN DOUBT, ASK A PROFESSIONAL. We get calls all the time from people who have questions about what is the best rope to use for any given application. Don't be afraid to ask. Ultimately YOU are responsible for your safety using ANY rope, so don't chance it.
In a broad generalization, most working loads vary from 1/10 to 1/4 of the average break strength of the rope. Applications for rope used in life support or personal fall protection environments must use the 1/10 ratio.
The actual cardboard spool the cord is on may vary. However, the length will match what is ordered.
When cutting sections off of these spools, the cordage will stretch and then relax. This causes inconsistencies with the lengths being cut. Many people will accommodate for this and cut longer sections and then think that they were shorted on the total length of the spool.